Tutorial: Loose Cord Holder

With all the indoors time this week I noticed cords all over the place. The cords took up more than a fair share of the floor space. Cord wraps & holders are nothing new, but I had an idea modification yesterday, sketched it out & whipped up four this morning. IMG_5103.jpg

These cord holders are perfect for cell phone and tablet chargers. For bigger corded items  these holders work great too! My main goal here was to utilize as much scrap material as I could to make something not-yet-useful productive. The buttons are from a collection of odd buttons & I used all fabric scraps. Customization is easy here! To make a longer & wider wrap for a certain product, measure the diameter of the cord when wrapped & double that number. This will give you an almost perfect measure of how long to cut your fabric; make sure to add at least a quarter inch at each end for seam allowance.

IMG_5114.jpg

Materials

  • Fabric scraps –enough for 2) 2″ x5″ pieces
  • Sewing Machine or Hand Sewing Supplies
  • Buttons
  • Fabric Marker or pen or chalk
  • Iron
  • Ruler
  • Rotary cutter or scissors

 

  1. Press fabric. Measure fabric & cut 2) 2″ x”5″ pieces.
  2. Place Right Sides together & pin fabric. IMG_5023.jpg
  3. Using 1/4″ clip each corner.IMG_5027IMG_5030.jpg
  4. Sew with a 1/4″ seam (or 1/4″ foot) the top & two side edges back-stitching at each end. Press to set stitches.IMG_5031.jpg
  5. Turn inside out, gently, with finger & knitting needle or chopstick. Press. Admire! IMG_5062.jpgIMG_5063.jpg
  6. Tuck in top edge & top stitch about an 1/8″ from the edge. IMG_5064.jpg
  7. Mark the button hole along the top edge & sew. If making two button holes, mark the top buttonhole first & then measure to add a second. This helps make sure fabric shrinkage doesn’t affect buttonhole placement. This may not be something you experience on your machine, but I like to be careful! When marking button holes, I went between 1/2″-3/4″ for the top button hole & around & 1″ to 1 1/4″ for the second button hole. IMG_5073.jpgIMG_5078.jpgIMG_5068.jpgIMG_5079.jpg
  8. Mark button position on fabric. Again, place the top button first. When placing the second button make sure the cuff is buttoned & then find the middle, marking it with a fabric pen. Sew on all buttons.IMG_5085.jpgIMG_5082.jpgIMG_5083.jpgIMG_5086.jpg
  9. Sit back & enjoy a less unraveled environment! Please share any pictures of wraps you make & let me know if you have any questions or comments. IMG_5091.jpg

Thank you to everyone that has stopped by, commented & liked this blog. Sewing, in all forms, has been a passion I’ve had for a long time & it is wonderful to share it with any one else that is even a little bit interested. Hope everyone is having a great weekend!  IMG_5107.jpgIMG_5112.jpg

Advertisement